Resetting The Picture Settings To The Factory Defaults; Changing The Picture Size; Freezing The Current Picture; Digital Noise Reduction - Samsung LE26R7 Bedienungsanleitung

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Size

You can select these options by
simply pressing the P.SIZE button
on the remote control.

Freezing the Current Picture

Digital Noise Reduction

Downloaded from www.Manualslib.com
You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 4 on page 11.
2. Press the
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
You can select the picture size which best corresponds to your
viewing requirements.
1.
Press the MENU button to display the menu.
Press the
2.
Press the
3.
Select the required option by pressing the
Press the ENTER
4.
Press the EXIT button to exit.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
"Auto Wide" function is available only in "TV", "Ext1", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only "16:9" and "4:3" mode can be adjusted.
Select
and down. After selecting
in the vertical direction.
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the
screen.
1. Press the MENU button to display the menu.
Press the
2. Press the
3. Press the
4. Press the EXIT button to exit.
manuals search engine
or button to select "Reset", then press the ENTER
or button to select "Picture", then press the ENTER
or button to select "Size", then press the ENTER
button.
by pressing the or buttons. Use the
, use the or button to magnify or reduce the picture size
or button to select "Picture", then press the ENTER
or button to select "Digital NR", then press the ENTER
or button to select "On" or "Off". Press the ENTER
English-12
button.
button.
button.
or button.
or button to move the picture up
button.
button.
button.