8.
When all the water in the water tank has run through the appliance, the water tank and espresso
indicator lights will go on.
9.
Empty the collection reservoir and put it back in place. If there are any residues in the water tank,
first empty the tank and rinse. Fill the tank with clean water up to the maximum indication and place
it back in the appliance.
10. The descaling process resumes. The appliance will run half of the water in the tank, pause for 1
minute and then run the other half of the water through.
11.
The descaling process has now ended and the appliance will turn off.
1
6
! Attention: the water that comes out of the coffee spout is extremely hot, so keep your hands away
from the appliance when it is in operation.
! Only use the descaling products supplied with the appliance. Other descaling products, aggressive
cleaning agents or vinegar can damage the appliance.
! If the appliance is not properly maintained, this can drastically reduce the service life of the appliance.
MANUAL RINSE
You can manually rinse the appliance to clean the coffee spout. It is
recommended that this be done regularly if the appliance is used frequently or
if the appliance has been idle for a long time.
1.
It is recommended to place an empty cup or collection reservoir under the
coffee spout.
2.
In standby mode, press and hold the on/off button and hot water key
simultaneously for 5 seconds.
3.
The hot water indicator light flashes. Hot water comes out of the coffee outlet.
4.
When the spout has been rinsed, the appliance returns to standby mode.
EMPTYING THE APPLIANCE
If you want to store or transport the appliance, it is best to empty it completely to ensure there is no water
in the pipes.
1.
In standby mode, press and hold the on/off button and lungo key simultaneously for 5 seconds.
2.
The empty appliance indicator light flashes on the display. If you do not want to continue with the
appliance emptying function, press the on/off button again to return to standby mode.
www.domo-elektro.be
3
2
7
8
4
+
9
+
DO718K
5
10
47