How To Operate - Hitachi CV-400PRO Bedienungsanleitung

3 TO ATTACH EXTENSION PIPE
Attach the extension pipes 9 together by joining
the two ends and twist slightly to secure it tightly.

How to operate

1 INSERT THE MAINS PLUG INTO A SOCKET AS
ILLUSTRATED bk bk
• The cleaner should be unplugged from
the mains when not in use.
2 ON/OFF SWITCH
Motor is switched ON/OFF by changing the
power switch bl .
3 RUG AND FLOOR TOOL
The tool is fitted with a brush at the back which can
either be used in the "withdrawn" or "projected" position.
These positions are operated by the pedal on the tool
marked "
For cleaning rug or carpet, keep the brush in its
"withdrawn" position, i.e., with the pedal marked "
pressed down with your toe.
If you feel the tool is too heavy to slide on the floor
and carpet, please reduce the suction power by
adjusting the suction control.
4 SUCTION CONTROL
Suction pressure can be reduced by moving the
adjustment ring bo on the curved joint pipe 1 to expose
a hole. The more the hole area is exposed, the lower
the suction is. Low suction pressure is recommended
for cleaning curtains, blinds, delicate fabrics, etc.
6
CAUTION
" (Carpet) bm and " " (Floor) bn .
9
bk
bl
bm
bn
"
1
bo