Fakir LYRIC VOICE Benutzerhandbuch Seite 26

EN
ATTENTION!
If the device plates are in the closed position, open the plate locking latch by pulling it
towards the cable direction (downwards).
OFF
adjustment)
Turn the device on by pressing the power button for 3 seconds. Your device will
automatically warm up to 180°C unless you adjust the temperature after pressing the on/
off button, and the Ion function will start with a blue light and the infrared function will start
with a red light. After pressing the on/off button, increase the temperature you want to set
by pressing the temperature increase button, and press the temperature decrease button
to decrease the set temperature. Adjustment can be made by pressing the temperature
increase and decrease buttons once, you can change the temperature in 10°C intervals
with each press. (100-110-120-130-140-150-160-170-180-190-200-210-220-230°C). Depending on
your choice, your device will warm up to the last temperature displayed on the screen. The
LED display of the device shows various temperatures until you reach the temperature you
have selected, and the temperature you have selected remains constant.
WARNING!
Pressing and holding the temperature increase button for 3 seconds causes the
temperature to rise directly to 230°C.
WARNING!
Pressing and holding down the temperature reduction button for 3 seconds can lock
the device (the "LOC" indicator light on the display). To prevent locking, press the button
again for 3 seconds.
OFF
Figure 1: LED Display before plugging device
Figure 2: LED display after plugging the device (no temperature
26