Components; Overview; Pluggable Terminal X1; Terminal Assignment - Stahl HART Betriebsanleitung

Compatible spare for IS1 I/O modules:
Series 9460/12*), 9461/12 *), 9465/12 and 9466/12
*) for operation with active 4-wire HART transmitters, a 9164 is additionally required for
each channel
6

Components

6.1 Overview

1
2
3
4
5

6.2 Pluggable terminal X1

For the module, a pluggable terminal X1 (screw-type terminal 162702 or 
spring clamp terminal 162695) for connection of field devices is available as accessory
(not included in the scope of delivery of the module!). 
The pluggable terminal X1 has 16 terminals for connection of the field cables.
X1
1 2 3 4 5 6
4 ... 20 mA HART

Terminal assignment

X1 
2-wire input/output with HART
Channel Terminals
0 1(+), 2(-)
1 3(+), 4(-)
2 5(+), 6(-)
3 7(+), 8(-)
4 9(+), 10(-)
5 11(+), 12(-)
6 13(+), 14(-)
7 15(+), 16(-)

The channels have no common connection to earth among themselves.
218080 / 946860310020
2015-10-30·BA00·III·en·02
1 Operating flap with insert label (open) and connection diagram
2 Module data (serial number, hardware revision number, software revision number,
manufacturing date, e.g.: 123456DE9999 Rev.A 01-01 0508)
3 Notch lever for removing the module from the BusRail
LED for operation indication ("RUN", green), error ("ERR", red) and maintenance 
4
("M/S", blue) (for further information, see "LED indications and troubleshooting")
5 Pluggable terminal X1 with two safety screws
15323E00
7 8 9 10 11 12 13 14 15 16
X1 
3-wire input with HART
Terminals
supply 1(+), signal 2(+), common 4(-)
--
supply 5(+), signal 6(+), common 8(-)
--
supply 9(+), signal 10(+), common 12(-)
--
supply 13(+), signal 14(+), common 16(-)
--
NOTICE
Analog Universal Module
HART for Zone 2
9468/33
Components
15324E00
X1 
4-wire input
Terminals
2(+), 4(-)
--
6(+), 8(-)
--
10(+), 12(-)
--
14(+), 16(-)
--
5