Klarstein Wonderwall Earth Bedienungsanleitung Seite 22

EN
22
2. Setting the weekly timer starts with the temperature setting for WEEK "1" (Monday).
The minutes of the switch-on timer and "ST" temperature are flashing. Press the up/
down buttons or
to enter the switch-on timer clock setting mode. The hour display of the switch-on
timer flashes. Press the up/down buttons
power button . The minute display of the on timer is flashing. Press the up/down
buttons or to set the minutes. Press the power button
the automatic shut-off time of the timer. The hour display of the shut-off timer flashes
on the display. Press the up/down button
button . The minute display of the shut-off timer flashes. Press the up/down
button or to set the minutes.
3. Press the mode button
(Tuesday). Set the temperature for WEEK "2, the switch-on timer clock is flashing,
and the "ST" temperature is flashing. At this time, complete the operation according
to the above 2. operation steps.
4. Follow the steps in 2. and 3. to set the weekly timer for the remaining days of the
week.
5. If you want to set the timer and temperature directly for a specific day of the week
(e.g. Wednesday), press the mode button
Press the mode button
WEEK "3" (Wednesday), appears on the display. The temperature display of the
switch-on timer lights up and the temperature display "ST" flashes. Press the up/
down button or
. You can now set the automatic switch-on time of the timer. First the hour display
of the switch-on timer flashes. Press the up/down buttons
hour, then press the power button
now flashes. Press the up/down buttons
the power button
display of the shut-off timer flashes during setting. Press the up/down buttons
or to set the hour, then press the power button
flashes. Press the up/down buttons
the setting is automatically saved and the appliance returns to the current mode.
Heating mode
When the weekly timer is activated, the display shows "ON" or "OFF". If the display
shows „ON", the appliance is currently in heating mode. If the room temperature
falls below the set temperature, the heating will be switched on. Otherwise, „OFF" is
displayed, which means that the heating mode is deactivated.
In real time mode, "ON" and "OFF" are not shown on the display. If the room
temperature is lower than the set temperature, the heating is switched on, otherwise the
heating mode is deactivated.
to set the "ST" temperature. Press the power button
or
or
to enter the temperature and timer setting for WEEK "2"
to enter the weekly timer mode.
repeatedly until the corresponding day of the week, e.g.
to set the temperature "ST", then press the power button
. The minute display of the switch-on timer
or
. Now the automatic shut-off time of the timer can be set. The
or to set the minutes. After 5 seconds
to set the hour, then press the
. Now you can set
to set the hour. Press the power
or to set the
to set the minutes, then press
. The minute display now