After Use - Perel AIRP001 Bedienungsanleitung

•
Ensure the filter is correctly installed before switching on the appliance.
•
Only replace the filter with a similar filter.
3. Re-install the cover on the appliance, making sure the cover is aligned with the
arrow on the housing.
4. Install the appliance on a non-slippery and flat surface. Always allow 0.5 m of
clearance on all sides.
5. Connect the appliance to the mains. The appliance will chime.
6. To add essential oil, remove the outlet cover and add onto the cotton. Re-install
the cover.
5.2
On-Off
Press this button once to switch the appliance on or off.
Speed
Press this button once to cycle through the three fan speeds. Note that the appliance
will automatically default to speed 1 when it is switched on.
Light
Press this button to switch the control panel lighting on or off.
Reset
This button lights when the filter needs to be replaced. After changing the filter, press
and hold this button for 5 seconds to reset the appliance.
Lock
Press and hold this button for 3 seconds to lock or unlock the control panel.
5.3
1. Switch off the appliance and unplug from the mains.
2. Keep the inside of the appliance dry. To prevent moisture build-up, dry with a
clean cloth.
V. 01 – 21/08/2020
Use

After Use

AIRP001
REMARKS
5 ©Velleman nv