Scope Of Supply; Technical Features - Nedo X-Liner 4 Bedienungsanleitung

2 Scope of Supply

3 Technical features

3.1 How it works
The X-Liner 4 projects a horizontal (H) and
three vertical (V1 + V2 + V3) laser lines that
cross in front of the unit, above the unit and at
the side. A plumb point (L) is projected onto the
floor, vertically below the point at which the
lines intersect.
The X-Liner 4 is equipped with a pendulum for
self-levelling and levels out tilted positioning of
the unit by up to 3° in each direction.
4 Structure of the Instrument
4.1 Overview
Operating Instructions X-Liner 4
1. Transport bag
2. X-Liner 4
3. Batteries
4. Laser target board
5. Operating Instructions
1. Control panel
2. Laser exit window - horizontal and
vertical beam
3. Adjustable baselegs
4. Circular level
5. Pendulum/transport locking device
6. Battery compartment
7. BSW 5/8" threaded connection and
plumb beam exit window on the
underside
8. 360° setting ring
9. Knurled thumb screw for fine adjustment
(Adjustment range approx. ±4.5°)
EN
9