Description And Operation; Guarantee And Responsibility - Vortice VORT HR 200 BP Betriebsanleitung

Description and operation

VORT HR 200 (henceforth "the appliance") is an
extremely high efficiency centralised heat recovery
ventilation system that can be floor mounted using the
special optional kit or wall mounted using the special
hooks provided.
Normally, stale air is extracted from "service" rooms such
as kitchens, bathrooms and laundries; at the same time,
fresh air from outdoors is ducted into rooms that are
normally lived in such as bedrooms, studies and sitting
rooms. The air flows required are detailed in current
national regulations; in the UK, the UK "Building
Regulations Document F1 " apply.
During normal operation the total volumes of air
extracted and air fed back in are essentially the same.
The incoming and outgoing air flow are perfectly
separate and suitably filtered. During the cold season,
heat from expelled air is transferred to incoming air. The
condensation created in the process, which is collected
inside the product, must then be piped to the outside.
The appliance silently and continuously ventilates the
house removing stale air and replacing it with filtered
fresh air from the outside. Inside the heat exchanger,
which is the key element in the appliance, heat is
exchanged between the two flows of air and this
guarantees the energy savings that the VORT HR 200
offers.
Before installing and/or using the equipment, read this
instructions manual carefully, in particular the paragraph
"Safety". For other safety and disposal information, see
the leaflet attached to the product.
The manual must be stored with the device and remain
at the disposal of qualified installation and maintenance
personnel
26

Guarantee and responsibility

Guarantee
The appliance is guaranteed for 2 years from the date of
purchase.
The guarantee does not apply to:
• installation/removal costs;
• damage caused by improper or negligent use of the
appliance;
• damage caused by repairs or attempted repairs or by
third parties not authorised by Vortice.
Responsibility
The appliance is designed for "balanced ventilation
systems". Any other use that has not been previously
discussed with a Vortice expert shall be considered
improper. In this case, Vortice shall not be held
responsible for any malfunction or failure.
Vortice shall not be held responsible for breakdowns due
to:
• improper use of the appliance;
• normal wear and tear of the appliance;
• the user's failure to comply with the instructions
provided in this manual