Reshuffle The Programme List; Select Favourite Tv Channels; Speakers - Philips 32pw9768 Bedienungsanleitung

Reshuffle the programme list

You can change the order of the stored TV
channels.
&
Select
Reshuffle
é
Follow the instructions on screen.
TV Setup
Speakers General Source Decoder
Setup
Test tone
Balance
Centre volume
(Surround volume)
Surround speakers
Auto surround

Speakers

Your TV is equipped with integrated front left, right
and centre loudspeakers, capable of reproducing
Stereo, Dolby 3 stereo and 3D Surround modes.
For full Dolby Pro Logic and Hall you should use
two amplified rear surround speakers connected to
the back of the TV.
See Extra loudspeakers/Amplifier, p. 24.
Depending on the output and Surround mode (see
Main menu,TV, Sound, Surround mode, p. 12)
selected, some menu items may be greyed out and
are not selectable.
Test tone controls
The menu item Test tone
balance the volume levels of the speakers.
&
Select
Test tone
é Once turned on, the Test Tone will circulate
through the left, centre, right speakers and
both rear surround speakers (if present).
"
Press the cursor up/down to select the desired
speaker for individual volume level adjustment.
'
Press the cursor left/right to adjust the volume
level.
in the Installation menu.
enables you to
and press the cursor right.

Select Favourite TV channels

& Select
Favourite programmes
menu.
é
Select your programme number with the
cursor up/down.
"
Select Yes or No
' é "
Repeat and
external you want to make a favourite or a
non-favourite TV channel or external.
The Setup menu contains items that control the
settings of the TV's functions, features, services and
peripherals you may have connected.
The menu reflects the speaker-related
Speakers
controls.
The menu allows you to change settings
General
that will typically be accessed only occasionally.
The Source menu allows you to select a source.
The menu allows you to define one or
Decoder
more programme numbers as decoder programme
numbers.
Surround Speakers
See Connect Peripheral Equipment, Extra
loudspeakers/amplifier, p. 24.
If no Surround Speakers are connected do
not change the predefined factory settings
which is . If Surround Speakers are
Off
connected select
(Dolby Pro Logic and Hall are not available
if Off is selected.)
Auto Surround
Sometimes the broadcaster transmits
special signals for Surround Sound
encoded programmes.
The TV automatically switches to the best
surround sound mode when
is switched
Surround
However it is possible to overwrite this
setting.
in the Install
with the cursor right.
for every TV channel or
.
On
Auto
.
On
7