Automatic Tuning Of Analogue Programmes; Program Sort; Manual Tuning Of Analogue Programmes - Philips 37PF5520D Bedienungsanleitung

Automatic tuning of analogue programmes

This menu allows you to automatically search for all
the analogue programmes available in your region.
& From the analogue mode, press the
(TV menu) key to display the main menu.
é With Cursor (œ É ) keys to select Install and
then Auto Store. Press É and the search begins.
After several minutes, the Install menu reappears
automatically.
TV Menu
Auto Store
Picture
Sound
Features
Program
Install

Program sort

& Press the
key.The TV Menu is displayed on
the screen.
TV Menu
Picture
Sound
Features
Install

Manual tuning of analogue programmes

This menu is used to store the programmes one
at a time.
& Press the
(TV menu) key.
é With Cursor (œ É ) keys to select Install and
then Manual Store.
TV Menu
Manual Store
Picture
Sound System
Features
Search
Install
Program No.
Fine Tune
" System : select Europe (automatic detection*)
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom
(I standard) or France (LL' standard),
* Except for France (LL' standard) : in this case,
select the option FRANCE.
12
8
É
TV 196 MHz
É
Europe
Store
" If the transmitter or the cable network broadcasts
the automatic sort signal, the programmes will be
correctly numbered.
' If this is not the case, the programme will be
numbered in descending order strating at 99, 98,
97, etc
Use the Sort menu to renumber them.
Some transmitters or cable networks broadcast their
own sort parameters (region, language, etc). Where this
is the case, make your choice using the o œ keys and
confirm with the É key.
To exit or interrupt the search, press the
If no picture is found, refer to the chapter entitled Tips
on p.20
( To exit from the menu, press
é With the cursor, select the Install menu followed
by the Sort menu.
" Select the programme you want to move using
the o œ keys and press É.
' Then use the o œ keys to select the new number
and validate with Ñ.
( Repeat steps " and ' for each program you
wish to renumber.
§ To quit the menus, press
' Search : press É key. The search starts. Once a
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered directly
using the keys.
If no programme is found, refer to the Tips chapter on
page 20.
( Program No : enter the required number with
the ÑÉ or (0 to 9) keys.
§ Fine Tune : if the reception is not satisfactory,
adjust using the ÑÉ keys.
è Store : press É key. The programme is stored.
! Repeat steps ' to è for each programme to
store.
ç To quit the menu, press
key.
key.
.
key.