Assembly And Adjustments - DeWalt DW030 Bedienungsanleitung

engl ish

assemBLy and adjUstments

installing and removing Battery (fig. 2)
NOTE: This LDM is powered by two LR03 (AAA-size) 1.5 V
instaLLing the Battery Pack
1. Lift up the battery compartment cover (a) as shown in figure 2.
2. Insert two LR03 (AAA-size) batteries into the compartment, placing
NOTE: When the battery icon flashes in the LCD display, replace
battery with 2 fresh LR03 (AAA-size) batteries.
attachment of Wrist strap (fig. 3)
Refer to figure 3 for instructions.
oPeration
instructions for Use
46
Downloaded from www.Manualslib.com
WARnInG! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
the batteries according to + and – icons on the inside of the
compartment.
WARnInG! Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into the laser beam. Serious eye injury may result
from staring at the beam.
WARnInG: Always observe the safety instructions and
applicable regulations.
CAUTIOn: Use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
manuals search engine
batteries.
DC