j.
ADDITIONAL SAFETY INSTRUCTIONS
FOR ABRASIVE APPLICATIONS
a.
b.
c.
SAFETY AND OPERATING
INSTRUCTIONS FOR DIAMOND
GRINDING WHEELS
Use
Only use the cut off grinding disc for cut off
grinding and not for rough grinding! Only use
the cut off grinding discs for the materials
indicated and not for any other materials. Risk
of injury! Cutting and cooling!
General Information
This tool insert is fragile, therefore extreme
care is required when handling it. The use of
damaged and incorrectly tensioned or installed
tool inserts is dangerous and can result in
serious injury.
Handling and storage
Tool inserts must be carefully handled and
transported. Tool inserts should be stored in
such a way that they are not exposed to any
mechanical damage or damaging environmen-
tal influences.
To avoid damage, remove the tool insert before
transporting an electric power tool.
7062244_MaxxSaw_Ma_#1503-19.indb 29
Downloaded from
www.Manualslib.com
Be especially careful when making
"pocket cuts" in existing walls or other
non-visible areas. The immersed cutting
tool can cause a kickback when cutting
into gas or water pipes, electric cables
or other objects.
Warning! Don't inhale or touch the
generated dust, this dust is a hazard
for the operator and for other people
nearby. Therefore, avoid using harmful /
toxic materials, such as items coated in
lead containing paint, some types of
wood and metal and use dust collection
equipment and personal protective
equipment, such as a dust mask.
Always wear ear protection!
Hold the electric power tool by the
insulated handling surfaces, since the
saw blade can make contact with its
own power cable. Contact live wire
places a voltage on the metal parts of
the electric power tool and will lead to an
electric shock.
manuals search engine
Selection and safe and proper use
Pay attention to the data on the label or on the
tool insert, such as the restrictions on use,
safety instructions or other advice. Do not alter
the characteristic direction of motion of the tool
insert. If there is ambiguity over the selection of
tool inserts, contact the manufacturer or a
specialist. Adhere to the permissible rotation
speeds for the tool insert and the electric
power tool.
Before use
Tool inserts must be given a visual inspection
before each start-up. Do not use damaged tool
inserts. Secure the piece to be worked on.
Inserting and changing
Tighten the tool inserts in accordance with
their instructions and those of the electric
power tool's manufacturer. The tightening of
tool inserts should only be undertaken by
qualified persons. After each tightening, carry
out a test run for a suitable length of time,
during which the characteristic maximum
working speed of the tool insert may not be
exceeded. Always tighten tool inserts without
introducing any out-of-roundness.
Use
1.
Pay attention to the operating instructions
of the electric power tool with which you
are using the tool insert.
2.
Before start-up, attach an appropriate
safety device to the electric power tool. Do
not carry out any work without protection
provided through safety devices.
3.
Use personal protective clothing and
equipment suitable for the type of machine
used and the application undertaken, e.g.
eye and face protection, hearing protec-
tion, respirators, safety shoes, safety
gloves and other protective clothing.
4.
Only undertake work for which the tool
insert is suitable (taking into consideration
use restrictions, safety instructions and
other data).
5.
Switch off the electric power tool before
placing it on the workbench or on the floor
and wait until the tool insert is stationary.
6.
For cut off grinding, place the tool insert
directly in the gap, so that the electric
power tool does not tilt.
.
English
29
09-04-15 11:31