Pre-Set Download - JVC HV-32D25EU Bedienungsanleitung

Pre-set Download

Download the registered data on the TV
channels from the TV to the VCR.
The Preset Download function automatically
begins when the initial setting is complete or
whenever the AUTO PROGRAM or EDIT/
MANUAL operations are performed.
• This function can be operated via VCR
operation.
When "FEATURE NOT AVAILABLE" is
displayed:
If "FEATURE NOT AVAILABLE" is
displayed, the download was not performed
correctly. Before trying to download again,
ensure the following:
• The VCR power is turned on.
• The VCR is T-V LINK compatible.
• The VCR is connected to the EXT-2
terminal.
• The SCART cable is fully wired.
Direct Rec
"What You See Is What You Record"
You can record to VCR the images that you
are currently viewing on TV by a simple
operation. For details, read the manual for
your VCR. Operate via the VCR. "VCR IS
RECORDING" is displayed.
In the following conditions, the VCR
will stop recording if the TV is turned
off, if the TV channel or input is
switched, or if the menu is displayed
on the TV:
• When recording images from an external
device connected to the TV.
• When recording a TV channel after it has
been unscrambled on a decoder.
• When recording a TV channel by using
the TV's output because that TV channel
cannot be properly received on the VCR's
tuner.
• When the VCR is not ready (for example,
when there is no tape inserted), "NO
RECORDING" is displayed.
• Operation via the TV is not possible.
• Generally, the VCR cannot record a TV
channel that cannot be received properly
by the VCR's tuner, even though you can
view that TV channel on the TV.
However, some VCRs can record a TV
channel by using the TV's output if that
channel can be viewed on the TV, even
though the TV channel cannot be received
properly by the VCR's tuner. For details,
refer to your VCR instruction manual.
TV Auto Power On/VCR Image
View
When the VCR starts playing, the TV
automatically turns on and the images from
EXT-2 terminal are displayed on the screen.
When the VCR menu is operated, the TV
automatically turns on and the images from
EXT-2 terminal are displayed on the screen.
• This function does not operate if your
TV's main power is turned off. Set your
TV's main power to on (standby mode).
Setting up your TV
7