English - Fellowes A75-A4 Anleitungen

LAMINATOR CONTROLS
C
D
QUICK START GUIDE
2 3
1
5 6 7
READY READY
POWER POWER
9 10
3
A75-A4_409646C_25L_111016.indd 3,5

ENGLISH

GB
LAMINATOR CONTROLS
On / off switch
A
Ready LED
B
E
Release lever ( )
C
CAPABILITIES
B
F
P
erformance
Format 9.5" / 240mm
Entry width A4 = 240mm
Pouch thickness (min) 75 microns
A
Pouch thickness (max) 75 microns
Warm up time (estimate) 3 minutes
Cool down time 60-90 minutes
Lamination speed approx. 30cm/min
(+/- 5%) (fixed speed)
Number of rollers 2
4
Ready indication Light
Release lever Yes
Clear Path / Anti-jam engine Yes
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
8
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or
wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final
laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
4
FEATURES & TIPS
Pouch / document entry slot
D
Pouch / document exit
E
Power on LED
F
Auto
Shut
Technical Data
Off
Voltage / Frequency /
Current(Amps) 220-240V AC, 50/60Hz,
1.25A
Wattage 300 Watts
Dimensions (HxWxD) 45mm x 210mm x 345mm
Net weight 3 Kg
SETTING UP THE LAMINATOR
Max document thickness
(laminating capacity) .040" / 1mm
1.
Ensure the machine is on a stable surface.
2.
Check there is enough clear space (min 50cm) behind the
machine to allow items to pass through freely.
HOW TO LAMINATE
4.
Switch the power on (located at the side of the machine).
5.
The red 'Power on' lamp will light up. The machine is now
heating up.
6.
When the machine is ready, the green 'Ready' lamp will
DO NOT leave the power cord in contact with hot surfaces.
remain on.
DO NOT leave power cord hanging from cupboards or shelves.
7.
Place the document into the open pouch. Ensure the
DO NOT use appliance if the power cord is damaged.
document is centred against the sealed edge. Use the
DO NOT attempt to open or otherwise repair the machine.
appropriate pouch size for the document.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult
supervision.
NEED HELP?
DO NOT laminate sharp or metal objects (eg: staples, paper
clips).
Let our experts help you with a solution.
DO NOT laminate heat-sensitive documents (eg: tickets, ultra-
sounds etc) on hot settings.
Customer Service... www.fellowes.com
DO NOT laminate with self-adhesive pouches on hot settings.
Always call Fellowes before contacting your place of purchase, see the rear cover for contact details.
DO NOT laminate an empty pouch.
Consider registering your machine at www.fellowes.com/register to receive updates and additional information.
'Release' function • For best results, use Fellowes ® brand pouches:
To remove or re-align a pouch during lamina- 75 micron.
tion, activate the release lever located on the
• This machine does not need a carrier to laminate. It is a
back of the machine. The pouch can only be
carrier-free mechanism.
removed from the entry slot when the lever
• Always put the item to be laminated into the appropriate
is activated.
sized pouch.
Auto Shut Off
• Always test laminate with a similar size and thickness
After 30 minutes the machine will automati-
before final process.
cally go in to Auto Shut Off mode. The Power
• Prepare pouch and item for lamination. Place item
LED will flash red for 5 minutes and then turn
within pouch centred and touching the leading sealed
off. The ready LED will turn off. To continue
edge. Ensure the pouch is not too large for the item.
using the machine press the ON/OFF switch.
The machine will reset itself.
• If required, trim excess material from around the item
after lamination and cooling.
3.
Plug the machine into an easily accessible socket.
8.
Ensure the pouch enters the machine sealed edge first.
Keep the pouch straight and central within the slot, not on
an angle. Use the entry markings as a guide.
9.
Upon exit, the laminated pouch may be hot and soft. To
prevent jamming remove the pouch immediately. Place
pouch on to a flat surface to cool. Take care when handling
a hot pouch.
10.
To release a pouch during lamination, activate the release
lever located on the back of the machine. Gently pull pouch
out of machine.
5
11/11/16 9:21 AM