7.4
Only for motorised version
16. Assemble the stage in the same way as the ma-
nual version. Check the perfect alignment of the
rear part of the stage with the rear arm of the fra-
me. An imperfect alignment could lead to an in-
correct functioning of the system. (Fig. 15)
17. Connect the cable ① from the stage to the frame
and tight the locking screws of the connectors ②.
(Fig. 16)
18. Connect the provided cables: ③ 12V power sup-
ply for the motorised parts; ④ 6V microscope po-
wer supply; ⑤ serial cable; ⑥ PS/2 mouse. (Fig.
17)
•
Connect power cables as the last step.
③
Page 14
Fig. 15
②
①
Fig. 16
④ ⑤ ⑥
Fig. 17