Pepperl+Fuchs RocketLinx ICRL-M-16RJ45/4CP-G-DIN Handbuch Seite 242

ICRL-M-8RJ45/4SFP-G-DIN und ICRL-M-16RJ45/4CP-G-DIN – Handbuch
Port Interface Configuration-Modus
no switchport port-security auto-learn
no switchport port-security shutdown-time
no switchport port-security sticky
no switchport private-vlan host-association
no switchport trunk native vlan
no switchport vlan mapping VID dot1q-tunnel OUTERVID
qos priority DEFAULT-PRIORITY
quit
rate-limit egress bandwidth <64–1000000>
rate-limit ingress bandwidth <64–1000000>
sfp ddm (enable|disable)
sfp eject
sfp scan
shutdown
spanning-tree bpdufilter
spanning-tree bpduguard
spanning-tree cost <1–200000000>
spanning-tree edge-port
spanning-tree link-type (auto|point-to-point|shared)
spanning-tree mst MSTMAP cost <1–200000000>
spanning-tree mst MSTMAP port-priority <0–240>
spanning-tree port-priority <0–240>
spanning-tree stp-state (enable|disable)
speed (10|100|1000|auto)
storm-control (broadcast|dlf|multicast) <2–262142>
switchport access vlan VLANID
switchport access vlan add VLANLIST
switchport access vlan remove VLANLIST
switchport block (multicast|unicast|both)
switchport dot1q-tunnel mode access
switchport dot1q-tunnel mode uplink
switchport mode private-vlan host
switchport mode private-vlan promiscuous
switchport mode svl VLANID
switchport port-security
switchport port-security auto-learn <0–10>
switchport port-security shutdown-time <0–86400>
switchport port-security sticky
switchport private-vlan host-association <2–4094> <2–4094>
switchport private-vlan mapping <2–4094> add VLANLIST
switchport private-vlan mapping <2–4094> remove VLANLIST
switchport trunk allowed vlan add VLANLIST
242