Signal Connections - Chauvet Professional MAVERICK MK PYXIS Schnellanleitung

Contact
Outside the U.S., U.K., Ireland, France, Germany, Mexico, or Benelux contact your distributor to request support or return
a product. Visit www.chauvetprofessional.com
What is Included
• Maverick MK Pyxis
• Seetronic Powerkon IP65 power cord
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC live
AC neutral
AC ground
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
You can link up to 4 Maverick MK Pyxis products at 100/120 V, 8 products at 208 V, 9 products at 230 V, or 10 products at
240 V. Never exceed this number. Power-linking cords can be purchased separately.
Replacing the Fuse
1. Disconnect this product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.

Signal Connections

The Maverick MK Pyxis can be linked to a controller or controller software using a DMX connection, an Ethernet
connection, or both. If using other Art-Net™, sACN, or Kling-Net -compatible products with the Maverick MK Pyxis, you
can control each individually on a single network. See the User Manual for information about how to connect and
configure the product for these signals.
Control Personalities
The Maverick MK Pyxis
Single Control
Basic (26 channels)
Standard (66 channels)
Advanced (113 channels)
Tour (131 channels)
Uses DMX, Art-Net™, sACN,
or W-DMX
In Dual Control mode, the Movement protocol and the Pixels protocol cannot be the same.
DMX Connection
The Maverick MK Pyxis will work with a DMX controller using a 3- or 5-pin DMX data connection. A DMX Primer is
available from www.chauvetprofessional.com.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using a Neutrik®
etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from
www.chauvetprofessional.com. Chauvet Professional recommends using unicast Art-Net™ for best results.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
sACN Connection
Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the layering and formatting of Architecture
for Control Networks to transport DMX512 data over IP or any other ACN compatible network. ACN is maintained by the
Professional Lighting and Sound Association (PLASA).
Maverick MK Pyxis QRG Rev. 7
QUICK REFERENCE GUIDE
for contact information.
Wire (U.S.)
Black
White
Green/yellow
uses
DMX, Art-Net™, sACN, W-DMX, and Kling-Net for its control personalities:
Dual Control Movement
Advanced (41 channels)
Uses DMX, Art-Net™, or sACN
• 2 Omega brackets with mounting hardware
• Quick Reference Guide
Wire (Europe)
Brown
Green/yellow
Basic (13 channels)
Standard (30 channels)
Blue
Dual Control Pixels
Basic (30 channels)
Standard (40 channels)
Advanced (80 channels)
Uses DMX, Art-Net™, sACN, or
EN
Screw Color
Yellow/brass
Silver
Green
Kling-Net
2