Pull the loose strap upwards behind the foam padding of
»
the seat bank's cross tube.
Thread the loose strap back
»
through the buckle.
Then tighten the straps so that
Then tighten the straps so that
»
the safety shell is mounted
firmly between the upper and
lower mounting clamps.
Tighten the lateral safety straps
Press the hammock down as shown and tighten the straps on the
»
lateral safety hooks to stabilize the hammock laterally.
When tightening the second side, make sure that the hammock
»
is leveled when viewed from the front and that the hammock is
not tilted.
Check that the safety hooks are firmly attached.
»
ASSEMBLY
27