Canon image PRESS C10010VP Kurzanleitung Seite 18

2
1
18
5
Adjust the position of the size change plates to align with
2
paper.
1
Set the paper of the target size to approximately 10 mm high.
2
Slide the size change plates (front) and size change plates (back)
to match the paper size.
IMPORTANT
• Do not give a strong shock to the paper holder plate when
loading paper into the paper deck, as this may result in a
malfunction or damage to the machine.
• Adjust the guides correctly to avoid causing a paper jam, dirty
prints, or making the inside of the machine dirty.
6
Lock the lever of the size change plate and fix it.
7
Squeeze the lever on the paper holder plate as shown
below. Without releasing the lever, slide the paper holder
plate to align it with the desired paper size.
8
Load all remaining paper into the paper deck.