Bosch SmartphoneHub Cobi Benutzerhandbuch Seite 25

Displays and settings of the
SmartphoneHub
The SmartphoneHub is connected to the drive unit via a
cable.
The smartphone is mechanically connected to the Smart-
phoneHub via a smartphone attachment.
The communication between the SmartphoneHub and
smartphone takes place via Bluetooth®.
The SmartphoneHub has a scratch-resistant 1.52" LCD dis-
play with a resolution of 192 × 64 pixels. The integrated dis-
play is suitable for use without a corresponding smartphone.
No app content of the smartphone can be shown on the in-
tegrated display.
24
a b c d e
a Error indicator:
This indicator appears when at least one error is
present in the error memory.
b Bicycle lighting indicator:
This indicator appears when the light is switched on.
c Smartphone connection indicator:
This indicator appears when the smartphone is
connected to the SmartphoneHub via
Bluetooth®.
This indicator appears when the smartphone is
connected to the SmartphoneHub and the
COBI.Bike app is open on the smartphone. In
this setting, the COBI.Bike app will record your
ride.
d Speed:
The current speed is displayed here.
e Assistance level indicator
OFF ECO
f Unit indicator:
Depending on the settings selected in the COBI.Bike
app, the speed can either be shown in km/h or mph.
The default setting is km/h.
g Indicator for second battery:
If the eBike is equipped with two batteries, the two
batteries are shown here in succession.
h Battery charge indicator:
The battery symbol displays the current state of
charge of the battery.
The battery is empty or not inserted.
i State of charge of the battery in per cent
Bosch eBike Systems
74
5
KM
35
KM/H
%
f g h i
TOUR SPORT TURBO
j Range of the eBike battery:
Depending on the state of charge of the battery, the
maximum range is shown here.
Other displays
1/1
498
!
HOLD '+' NOW
!
j
ENGINE OFF
n/a
KM
D I S A B L E D
35
%
68%
24 74
5
KM
35
KM/H
%
INSPECTION DUE
x x
___
23
English – 5
An error has occurred.
The error indicator will remain on the
indicator until the user presses the se-
lect button (9) to acknowledge the er-
ror. The warning triangle subsequently
remains in the main display view
(alongside speed, etc.) until the error
has been resolved.
In a two-step activation process, after
pressing the button (13), the rider is
prompted to press the + button (14)
for two seconds.
After two seconds, the push assist-
ance mode is displayed.
This indicator and the text shown on
the left appear when there are prob-
lems that mean that the drive unit can-
not provide any assistance. This is the
case if the eBike battery is empty, for
example.
If the eBike battery is being charged,
the screen shows the current state of
charge. The battery symbol flashes.
This indicator appears, if, for ex-
ample,
– the DiagnosticTool is connected or
– an external power source (e.g. a
power bank) is connected to the
SmartphoneHub
If the state of charge of the eBike bat-
tery is below 20 %, the battery charge
indicator h will flash.
This indicator appears, if, for ex-
ample,
– the state of charge of the eBike bat-
tery is low or
– the system does not recognise an
eBike battery.
The assistance is switched off.
These indicators appear when the
eBike is due for servicing.
This indicator appears if software
problems occur. A software update
must be carried out in the COBI.Bike
app.
1 270 020 XBC | (22.04.2020)