Before Installation; Delivery Checks; Installation; Location - Nederman NOM 18 Bedienungsanleitung

EN NOM 18/28
Table 3-1: Technical data
Filtration efficiency:
•
without HEPA filter
•
with HEPA filter
Operating temperature
Max. air flow
Filter area:
•
Main filters
•
HEPA filter
Power
Voltage/rpm
Frequency
Phase
Safety class
Noise level*
Weight
Material recycling
* With silencer, measured according to ISO 11202.
4

Before installation

4.1

Delivery checks

Check the unit for any transport damage. In case of damage or parts missing, notify the carrier
and your local Nederman representative immediately.
5

installation

5.1

Location

NOM 18/28 is to be installed indoors.
Ensure that there is enough room for filter operation, replacement and maintenance.
The filter legs, see Figure 3, item 4 (NOM 18) or Figure 4, item 4 (NOM 28), can be extended
and secured in 3 different positions. Fit the filter legs in one of the positions. Place the unit in the
correct location.
5.2

Installing NOM 18/28

For the location of different parts, see Figure 3 (NOM 18) or Figure 4 (NOM 28).
WarNiNg! Risk of personal injuries.
The unit is to be lifted with its front side towards the fork truck, see Figure 3, item X (NOM 18)
or Figure 4, item X (NOM 28).
WarNiNg! Risk of personal injuries.
Always use proper lifting and protective equipment.
Use a fork truck to lift the unit from the pallet.
12
NOM 18
>97.5%
>99.97%
5–60 °C
1,800 m /h
3
14 m
2
24 m
2
1.1 kW
See the type label on the motor
50/60 Hz
1~/3~
IP55
63.8 dB(A)
220 kg
90 percent per weight
NOM 28
>97.5%
>99.97%
5–60 °C
2,800 m /h
3
21 m
2
40 m
2
2.2 kW
See the type label on the motor
50/60 Hz
1~/3~
IP55
68.2 dB(A)
242 kg
88 percent per weight