17
MAINTENANCE
CLEANING METAL CASSETTE GREASE FILTERS
• The fi lters must be cleaned every 2 months, or more frequently in
case of particularly heavy use of the hood. Filters can be washed
in a dishwasher.
• Pull out the sliding suction panel.
• Remove the fi lters one by one, after having disconnected the
relative fastening elements.
• Wash the fi lters, taking care not to bend them. Let them get
dry before refi tting them. (The colour of the fi lter surface may
change throughout the time but this has no infl uence to the fi lter
effi ciency).
• When refi tting the fi lters, make sure that the handle is visible on
the outside.
• Close the sliding suction panel.
CHARCOAL FILTER (RECYCLING VERSION))
REPLACING CHARCOAL FILTERS
• These fi lters are not washable and cannot be regenerated, and must
be replaced approximately every four months or more frequently
by particularly heavy use.
• Pull out the sliding suction panel.
• Remove the grease fi lters.
• Remove the saturated carbon filter by releasing the fixing
hooks
• Fit the new fi lter by hooking it into its seating.
• Replace the grease fi lters.
• Close the sliding suction panel.
11 W fl uorescent light
• Remove the metal terminals fi xing the glass.
• Slide the glass cover out of one of the fastening clips. Lower
the unfastened part of the glass cover slightly, so that the cover
can be completely removed.
• Replace the light with a new one of the same type and rating.
• Replace the glass cover in reverse order.
GREASE FILTERS
LIGHTING
LIGHT REPLACEMENT
EN