Selection Of Parameter Presettings For A Hydraulic Unit; Applications - Honeywell SDC Installationsanleitung

Selection of parameter presettings for a hydraulic unit

Operation
34
5 Selection of parameter presettings for a hydraulic
unit
In the state of delivery, each controller type covers multiple
hydraulic units. Each hydraulic unit can be changed or expanded
by changing and/or adding parameters.
A hydraulic unit is selected with parameter 01 in the "Hydraulics"
menu. The corresponding inputs and outputs are assigned
automatically based on the hydraulics schematic.
This function simplifies the setting of a documented hydraulic unit
considerably.
Additional applications can be covered by setting the individual
parameters. Where necessary, the parameters are also specified
in these mounting instructions. A description of how to access
parameter settings can be found in the parameter list.
Operating in-
formation
Hydraulics
preselection
Pos: 9 /156-Honeywell/Montage/Applikationen @ 1\mod_1208507778701_6.doc @ 11085

6 Applications

See chapter 10 Heizungs-Applikationen / Heating applications pg. 46 and
chapter 11 Fernheizungs-Applikationen / District heating applications pg. 72.
Pos: 10 /156-Honeywell/Montage/Technische_Daten_Allgemein @ 1\mod_1207651393978_6.doc @ 10115
Menu Parameter
"Hydraulics" 01
SDC
Enter
schematic, e.g.
0201
MU1H-0207GE51 R0313