Installation Instructions; General Advice - Profile LS2030 Installationsanleitung

Photoelectric Beam Detector
1. Preface
Dear Customer,
thank you for purchasing this photoelectric beam detector. This equipment is
produced with state-of-the-art technology, which complies with the current
standards of domestic and European regulations. The CE has been proven and all
related certifications are available from the manufacturer (www.security-center.org)
upon request.
To ensure proper and safe operation, it is your obligation to observe these

installation instructions!

In the event of questions, please contact your local specialist dealer.
2.

General advice

To reduce the risk of electric shock and to ensure that your guarantee remains
valid, do not open the equipment when it is in use.
No part of the product may be changed or modified in any way.
The photoelctric beam must only be used within the prescribed temperature and
protection class ranges. Using the equipment outside the prescribed ranges results
in greater wear and early failure. All required specifications can be found in the
technical data.
Avoid greater physical stress of the equipment (knocks, vibrations, etc.). Incorrect
handling and bad transport conditions can lead to damage to the equipment.
We want you to work only with products that incorporate state-of-the-art technology.
For this reason, we reserve the right to make technical modifications.
We reserve the right to make changes to these instructions without prior notice.
© Security-Center GmbH & Co. KG, February 2008
Installation Instructions
LS2030 / LS2060 / LS2080 / LS2120
11