Care And Cleaning - Kenwood IC700 Serie Bedienungsanleitung

hints
G
Wool and velvet. Guide the iron 2 cm
above the fabric, depressing the steam
button. The power of steam smoothes
away creases and revitalises the fabric.
Do not pull the fabric.
G
Vertical ironing – suits, dresses and
curtains are smoothed, renewed and
put into shape again while they are
hanging (see below).
PTFE soleplate
(model IC800 only)
The soleplate can be fitted when
ironing delicate items such as silk.
Follow the instructions given on the
packaging and keep them handy for
future use. Always take care when
fitting, particularly if the iron is hot.
If the soleplate (Kenwood model
ICSP01) is not included in pack it
can be purchased separately from
the shop where you purchased your
steam station.
steaming the creases out of
curtains, hanging clothes,
wall hangings
1 Make sure there is water in the tank.
2 Turn the temperature control to
.
3 When the green ready to steam light
glows pull the material slightly with
one hand: hold the iron upright with
the other.
4 Tilt the iron forwards, then move it
down the material, pressing the
steam button.
G
Never steam clothes being worn.
Keep your hands away from the
steam and soleplate.
G
Always ensure that the iron is facing
away from the user and/or others
when vertical steaming.
G
For material other than linen or
cotton, keep the iron off the material
to avoid burning it.

care and cleaning

G
Always switch off, unplug and allow
to cool overnight before cleaning or
storing.
G
Empty the water tank.
G
When carrying the unit, always use
the carry handle and make sure the
iron is secure before moving.
the outside
soleplate
G
Don't scratch the outside by ironing
anything hard eg zips.
G
To remove minor remains of material
stuck to the soleplate, rub
lengthways with a soft, damp, non-
metallic cleaning pad.
casing
G
Wipe with a damp cloth.
the inside
G
Every 2 to 3 months clean the boiler
making sure it has been allowed to
cool overnight first. Turn the steam
station upside down and pull back
the flap covering the boiler cap
Unscrew the boiler cap using a coin
and empty out any water. Add one
cup of tap or filtered water and
shake the appliance then empty out
all the water. Repeat this operation
until the water from the boiler comes
out clear and clean.
When cleaning is finished pour
500ml fresh tap or filtered water into
the boiler and screw the boiler cap
back on again without using
excessive force. Replace the cover.
The unit is now ready to use.
5
.