Installation - Manhattan 150682 Kurzanleitung

Serial PCI Express Card • Quick Install Guide
thank you for purchasing the Manhattan
power output, Model 150682.
this guide presents the basic steps to set up and operate this device. For detailed
instructions and specifications, refer to the user manual on the cD enclosed with
this product or visit www.manhattan-products.com.

Installation

1. power off the system. insert the pcie card into an available pcie slot.
2. power up the system, and insert the driver cD into your cD-RoM/DVD drive.
3. When Windows displays the Found new hardware Wizard, click "next. "
4. select "search for a suitable driver for my device (Recommended)" and
click "next. "
5. on the next screen, check that "specify a location" is the only option that's
selected, then click "next. "
6. Enter "X:\" (or whatever letter corresponds to your cD-RoM/DVD drive) and
click "Browse. "
7. specify a location; for example, "X:\ pci io\oXmpci \Win_Driver_v7.0 \x86"
for a 32-bit operating system). click "oK. "
8. When the wizard indicates that it has found a driver for the device, click
"next, " then click "Finish. "
9. Repeat step 3 – step 8.
5 VDC Jumper Setting for each RS232 Port
• 5 VDC on Pin 9 of the DB9 connector = 5 V short
• Normal RI function on Pin 9 of the DB9 connector = RI short
NOTE: For 5 V connection, use the "Y" power cable.
Package Contents
• Serial PCI Express Card with 5 V Power Output
• 2 brackets
• Cable
• "Y" power cable
• Driver CD and user manual
2
150682_01_QIG_ML.indd 2
English
serial pci Express card with 5 V
®
English
5/25/10 9:01:37 AM