Magicspeed Installation; Tools Required - Dometic WAECO MagicSpeed MS900 Montageanleitung

MagicSpeed installation

6
6.1
For installation and assembly you will need the following tools:
Drill bit set (fig. 1 1, page 3)
Drill (fig. 1 2, page 3)
Screwdriver (fig. 1 3, page 3)
Set of ring or open-ended spanners (see fig. 1 4, page 3)
Set of box spanners (fig. 1 5, page 3)
Measuring ruler (fig. 1 6, page 3)
Hammer (fig. 1 7, page 3)
Centre punch (fig. 1 8, page 3)
To establish and test the electrical connection, the following tools are re-
quired:
Insulating tape (fig. 1 9, page 3)
Sealant
Cable bushing sleeves (optional)
To fasten the module and the cables, you may need additional screws and
cable binders.
26
Downloaded from www.Manualslib.com
MagicSpeed installation

Tools required

manuals search engine
MagicSpeed