Adjusting The Keyboard Touch (Key Touch); Transposing The Key Of The Keyboard (Transpose) - Roland HP101e Bedienungsanleitung

Chapter 2. Performance
Pressing the "C#" key as you hold down the [Reverb/Key
Touch] button reduces the amount of reverb effect
applied. Holding down the [Reverb/Key Touch] button
and pressing the "D#" key increases the reverb effect.
You can change the Depth of the Reverb Effect by
pressing any "C#" or "D#" key.
To restore the depth of the reverb effect at the time the
power is turned on, hold down the [Reverb/Key Touch]
button and press the "C#" and "D#" keys simultaneously.
Adjusting the Keyboard
Touch (Key Touch)
You can adjust the touch (playing feel) of the keyboard.
1. Hold down the [Reverb/Key Touch] button and
press either the "A0," "B0," "C1," or "D1" key.
The feel of the keyboard will change. The key touch is set
to "Medium" when the instrument is turned on.
Key
Pressed
A0 Light
B0 Medium
C1 Heavy
D1 Fixed
12
A0 B0 C1 D1
Settings
Fortissimo (ff) can be produced by
playing less strongly than usual,
making the keyboard feel lighter.
This setting makes it easy to play,
even for children.
This allows you to play using the
most natural touch. This is the closest
to the touch of an acoustic piano.
Fortissimo (ff) cannot be produced
unless you play more strongly than
usual, making the keyboard feel
heavier. Dynamic fingering adds
even more feeling to what you play.
Sounds at a fixed volume, regardless
of your keyboard playing strength.
Transposing the Key of the
Keyboard (Transpose)
By using the "Transpose function," you can transpose
your performance without changing the notes you play.
For example, even if the song is in a difficult key with
numerous sharps (#) or flats (b), you can transpose it to a
key that is easier for you to play.
When accompanying a vocalist, you can easily transpose
the pitch to a range that is comfortable for the singer, while
still playing the notes as written (i.e., with the same finger-
ing positions).
While holding down these two but-
tons...
C5
Press
1. Hold down the [Metronome] and [Reverb/Key
Touch] buttons, and press the key for the note you
want to set as the tonic.
Keys for Setting the Transposition: C5–B5
The keyboard will be transposed.
For example, if you want the E pitch to sound when you
play the C key, hold down the [Metronome] and [Reverb/
Key Touch] buttons and press the E5 key.
This setting returns to the original value (0) when you
turn off the power.
fig.trans.e
If you play C E G
To cancel the transposition, hold down the [Metronome]
and [Reverb/Key Touch] buttons and press the "C5" key
(transposition 0).
C6 C7
It will sound E G# B