Tips And Recommendations For Use; Anti-Freeze Protection; Technical Data - SOMFY OXIMO 40 AUTO io Anleitung

3.6. TIPS AND RECOMMENDATIONS FOR USE

3.6.1. Questions on the OXIMO 40 AUTO io?
Observations Possible causes
The motorised
The control point battery is weak.
product does not
operate.
The drive is in thermal protection
mode.
The drive is in anti-freeze protection
mode.
If the motorised product still does not work, contact a motorisation and home automation professional.
3.6.2. Replacing a lost or broken Somfy io-homecontrol
To replace a lost or broken io-homecontrol ® control point, contact a motorisation and home automation
professional.
3.6.3. Obstacle detection
The automatic obstacle detection function protects the apron on the motorised product and enables
- If the apron encounters an obstacle when it is lowered,
Either the motorised product stops automatically.
Or it stops and is raised automatically.
- If the apron of the motorised product encounters an
obstacle when raised, it stops automatically.

3.6.4. Anti-freeze protection

The anti-freeze protection function operates in the same way
If the OXIMO 40 AUTO io detects any resistance, it
-
in its initial position.

4. TECHNICAL DATA

Power supply
Operating temperature
Index protection rating
Safety level
Maximum number of associated control points
and sensors
Somfy hereby declares that the drive covered by these instructions, when marked for input voltage 230V 50Hz and used
in accordance with these instructions, is in compliance with the essential requirements of the Machinery Directive
including place and date of issue can be found at the Internet address www.somfy.com/ce.
Copyright © 2014 Somfy SAS. All rights reserved.
EN
Solutions
Check whether the battery is weak and replace
instructions
Wait for the drive to cool down.
Wait until the temperature permits the
motorised product to move again.
® control point
230V~ 50 Hz
868-870 MHz io-homecontrol ® two-way tri-band.
- 20°C to + 60°C
IP 44
Class I
9
29
Images not contractually binding