Operating States And Led Indication; Activate / De-Activate Doorguard; Permanent Release - Honeywell 041450.17 Montage- Und Bedienungsanleitung

44
10.5

Operating states and LED indication

10.5.1

Activate / de-activate Doorguard

If the door is open (DG2 triggered) activation is not possible!
Operating
9 Sequence 9
or
or
10.5.2

Permanent release

If manually de-activated, the door can be opened any number of times and remain open for any length
of time (deactivated without time limitation). Activation is performed using an ID pass card or key.
Operating
9 Sequence 9
or
or
or
Mounting and Operating Instructions Doorguard for MB panels BUS-2
Duration Operating state
Doorguard active
Doorguard inactive
Reactivating the key
> 200 ms
switch or operation via an
ID carrier, reactivates the
as per
programmed
Doorguard inactive
"Door open
time"
Doorguard active when
programmed
"automatically"
Doorguard active when
programmed
"manually"
Duration Operating state
Doorguard active
> 200 ms Doorguard inactive
> 3 seconds Permanent release*
Permanent release*
permanent door release
permitted, irrespective of
parameterization
Stopp permanent
Doorguard active
Red LED
"Activation"
device.
Lights up (static)
when door is
opened
Red LED
"Activation"
Door open
–>LED lights up
Door closed
–>LED off
release
Green LED
"Operating state"
Off Lights up (static)
Off
Off Lights up (static)
Lights up (static)
Off
Green LED
"Operating state"
Off Lights up (static)
Off Lights up (static)