General Information; Operation And Controls; Maintenance And Cleaning - Nova Mix Power 220120 Bedienungsanleitung

General information

Congratulations with the purchase of this
powerful NOVA hand blender. You can use
the blender to blend and puree ingredients.
This hand blender comes with a mixing
bowl.
Operation and
controls
See figure 1.
The appliance includes the following:
1 Lid for the mixing bowl
2 Mixing bowl with volume indication
3 Hand blender
4 On/Off switch
5 Turbo On/Off switch
6 Motor housing and handle
7 Power cord and plug
Before using for the first time
1 Remove all packaging materials.
2 Clean the appliance (see 'Maintenance
and cleaning').
Use
1 Place the hand blender on the motor
housing and rotate it anticlockwise until
it clicks into place.
2 Place the ingredients in the mixing bowl
or in a dish. The dish must have edges
that are high enough to prevent the
ingredients from splashing. When using
liquid ingredients fill mixing bowl for
maximum 50% to prevent the
ingredienst from splashing.
3 Insert the plug into the plug socket.
4 Dip the hand blender as deeply as
possible into the mixing bowl or the
4 Mix Power Article 220120
dish, and then turn on the appliance
using the On/Off switch. (Not the other
way round as this may cause
splashing.)
For extra speed, you can use the turbo
On/Off switch instead of the normal On/
Off switch.
5 Move the hand blender up and down
gently through the ingredients, but
make sure that the blade will not be
lifted above the surface of the
ingredients. (Otherwise, splashing may
occur.)
The blender works very quickly. The
ingredients will be blended within a few
seconds. The longer the blender is
turned on, the finer the ingredients will
be blended.
6 Turn off the appliance once you have
achieved the desired result.
7 Remove the plug from the plug socket.
8 Rotate the hand blender clockwise to
remove it from the motor housing.
9 Clean the used parts before storing
them (see 'Maintenance and cleaning').
Maintenance
and cleaning
• Make sure the plug has been removed
from the plug socket before cleaning
the appliance.
• Make sure no moisture gets into the
motor housing.
• Do not immerse the motor housing in
water or in other liquids. If this does
happen, do not use the appliance
again. For safety reasons, dispose of
the appliance.
• Only the accessories may be cleaned
in a dishwasher, not the motor
housing.
• Never use abrasive or aggressive
cleaning products.