Reciclying And Disposing; Guarantee - Greencut GS245X Betriebsanleitung

• To reduce the risk of fire, keep the machine clean by removing traces of material, oil and grease.
• For long periods of storage, store the machine without fuel. The stored fuels must be stabilized with a stabilizer.
• Store the machine out of the reach of children.
• Storage from 30 days without use:
1. Clean the outer parts thoroughly and apply a light layer of oil to all metal surfaces.
2. Remove the spark plug and put about 3ml of oil into the cylinder through the hole in the spark plug. Slowly
pull the starter cable out 2 or 3 times so that the oil covers the inside of the engine evenly. Reinstall the
spark plug.
3. Blow dust/waste from the air filter element using compressed air if present.
4. Store the machine in a clean, dry, dust-free place.
5. Always make sure the chainsaw has the proper cover on the sword and chain assembly.

RECICLYING AND DISPOSING

Worn products are potentially recyclable and should not be disposed of in the usual waste. Help us to protect the
environment and preserve natural resources. Dispose of the device in an environmentally friendly manner. Do not
dispose of it with household waste. Its plastic and metal components can be separated and recycled. Take this
appliance to an approved recycling centre (green dot).
Gasoline, used oils, oil/gasoline blends and objects stained with gasoline (e.g., rags) should not be disposed of in
regular trash, sewage, dirt, rivers, lakes or the sea. Oil-stained items should be disposed of in accordance with local
regulations: take them to a recycling center.
The materials used in the packaging of the machine are recyclable: please dispose of them in the appropriate container.

GUARANTEE

GREENCUT guarantees all GREENCUT products for a period of 24 months (valid for Europe). The warranty is subject
to the date of purchase taking into account the intended use of the product.
As a condition subject to warranty, the original receipt must be presented indicating the date of purchase and its
description as well as the defective tool.
The warranty does not cover normal wear and tear, especially on blades, blade fasteners, turbines, light sources,
fan and transmission belts, impellers, air filters, spark plugs and damage caused by improper use, especially non-
compliance with operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or other than with original GREENCUT
spare parts, the warranty will be voided.
In the event of a justified warranty claim, we are entitled, at our discretion, to repair or replace the defective tool free
of charge. Other claims beyond this warranty are not valid.
77
EN