Adjusting The Contrast (Contrast); Adjusting The Black Level Of An Image (Brightness) - Sony SDM-N50R Bedienungsanleitung

M
x
Using the MENU,
1
Display the main menu.
Press the MENU button to display the main menu on your
screen.
MENU
2
Select the menu you want to adjust.
Press the M(+)/m(–) buttons to display the desired menu.
Press the OK button to select the menu item.
3
Adjust the menu.
Press the M(+)/m(–) buttons to make the adjustment. Then
press the OK button to return to the previous menu.
4
Close the menu.
Press the MENU button once to return to normal viewing. If
no buttons are pressed, the menu closes automatically after
about 30 seconds.
MENU
x
Resetting the adjustments
You can reset the adjustments using the RESET menu. See
page 15 for more information on resetting the adjustments.
12
m
(+)/ (–), and OK buttons
INPUT
1
,
2
OK
INPUT
1
,
2
OK

Adjusting the contrast (CONTRAST)

Contrast adjustment is made using a separate CONTRAST menu
from the main menu (page 11). This setting is stored in memory
for the signal from the currently selected input connector.
1
Press the 6 (contrast) button.
The CONTRAST menu appears on the screen.
CONTRAS T
4 8 . 4 k H z /
Horizontal frequency
of the current input
signal
Displaying the current input signal
The horizontal and vertical frequencies of the current input signal are
displayed in the CONTRAST and BRIGHTNESS menu.
2
Press the M(+)/m(–) buttons to adjust the contrast.
The menu automatically disappears after about 3 seconds.
Adjusting the black level of an
image (BRIGHTNESS)
Brightness adjustment is made using a separate BRIGHTNESS
menu from the main menu (page 11). This setting is stored in
memory for the signal from the currently selected input
connector.
1
Press the 8 (brightness) button.
The BRIGHTNESS menu appears on the screen.
B R I GHT
4 8 . 4 k H z /
Horizontal frequency
of the current input
signal
2
Press the M(+)/m(–) buttons to adjust the
brightness.
The menu automatically disappears after about 3 seconds.
If the screen is too bright
Adjust the backlight. For more information about adjusting the
backlight, see "Adjusting the backlight" on page 16.
Note
You can adjust neither contrast nor brightness when displaying the main
menu on the screen.
7 0
6 0 H z
Vertical frequency of
the current input
signal
NESS
5 0
6 0 H z
Vertical frequency of
the current input
signal