brennenstuhl WID 550 Bedienungsanleitung Seite 15

2. Beep sound indicates that learn
3. CHANNEL symbol will flash and unit will beep as
4. Temperature & humidity readings of remote
•
CLOCK & ALARM SETTING
Clock setting
•
1. Press and hold MODE until time flashes
2. Select hour using HOUR
3. Select minute using MINUTE
4. Press AM/PM to toggle between
5. Press MODE to finish setting
Alarm setting
A Select alarm mode using MODE
B Select hour using HOUR
C Select minute using MINUTE
D In alarm mode, press ALARM to
E When alarm sounds,
•
Downloaded from www.Manualslib.com
function has started.
each transmitter is detected.
transmitter displays on the receiver.
Press & hold CHANNEL for 3 seconds to start auto
channel scroll function. ln this mode, the display will
scroll through the data from all the valid channels,
each of which will be shown for 8 seconds. Press &
hold CHANNEL for 3 seconds again to disable this
function.
Modes are arranged in a circular pattern starting with
clock:
clock alarm 1 alarm 2
12 or 24 hour format
toggle alarm On and Off
snooze the alarm for 5 minutes. After that the alarm
will sound again.
Press any other key will shut off the alarm. Without
interruption, alarm will shut off automatically after
one minute.
manuals search engine
high temperature alarm Iow temperature alarm
will flash. Press SNOOZE to
1, 5 4 3 2
E, A D C B
15