English; General Description - Philips Intellicare GC8030 Bedienungsanleitung

ENGLISH

6
Introduction
Thank you for buying the Intellicare, the new intelligent steam-ironing
system from Philips.
The iron offers non-stop ironing and also has a detachable water tank
that can be refilled at any moment.
The iron has a constant high steam output, which is a unique feature
for steam-ironing systems with unlimited autonomy.This gives you a
constant and fast ironing result.

General description

A
Shot-of-Steam button (GC8030 only)
B
Temperature dial
C
Steam activator
D
Temperature pilot light
E
Supply hose
F
Soleplate
G
Iron stand
H
Power on/off switch with pilot light
I
'Water tank refill' indicator light (GC8030/GC7030 only)
J
Steam tank pilot light (GC8030/GC7030 only)
K
Mains cord
L
Steam tank
M
Calc-Clean rinsing cap & plug
N
Cord storage facility for mains cord & supply hose
(GC8030/GC7030 only)
O
Filling opening
P
Detachable water tank
Q
Water tank release lever
R
Transport handgrip
S
Cup
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Only connect the appliance to an earthed wall socket.
◗ Do not use the appliance if the plug, the cord, the supply hose or
the appliance itself shows visible damage, or if the appliance has
been dropped or is leaking.
◗ Check the cord and the supply hose regularly for possible
damage.
◗ If the mains cord or the supply hose is damaged, it must be
replaced by Philips, a service centre authorised by Philips or
similarly qualified persons in order to avoid a hazard.