Power Connection; Cabinet Mount - Samsung NV75T8979 Serie Benutzer- Und Installationshandbuch

Installation

Power connection

L N
01 02 03
01 BROWN or BLACK
02 BLUE or WHITE
03 YELLOW and GREEN
WARNING
Do not step on or twist the wires during installation, and keep them away from
heat-emitting parts of the oven.
8 English
NV75T8879RK_EU_DG68-01258C-00_EN.indd 8
Plug the oven into an electrical socket. If
a plug-type socket is not available due to
allowable current limitations, use a multi-
pole isolator switch (with at least 3 mm
spacing in-between) in order to meet safety
regulations. Use a power cord of sufficient
length that supports the specification H05
RR-F or H05 VV-F, min. 1.5-2.5 mm².
Rated current (A) Minimum cross-
sectional area
10 < A ≤ 16 1.5 mm²
16 < A ≤ 25 2.5 mm²
Check the output specifications on the label
attached to the oven.
Open the rear cover of the oven using a
screwdriver, and remove the screws on the
cord clamp. Then, connect the power lines to
the relevant connection terminals.
The ( )-terminal is designed for
earthgrounding. First connect the yellow
and green lines (earthgrounding), which
must be longer than the others. If you use
a plug-type socket, the plug must remain
accessible after the oven is installed.
Samsung is not responsible for accidents
caused by missing or faulty earthgrounding.

Cabinet mount

If installing the oven in a built-in cabinet, the cabinet must have its plastic surfaces
and adhesive parts resistant to temperatures in accordance to EN 60335. Samsung
is not responsible for damage to furniture from the oven's heat emission.
The oven must be properly ventilated. For ventilation, leave a gap of about 50 mm
between the lower shelf of the cabinet and the supporting wall. If you install the
oven under a cooktop, follow the cooktop's installation instructions.
Required dimensions for installation
Oven (mm)
B
C
A
D
L
K
E
G
F
J
H
I
560 Max. 507.5
A G
B 177 H Max. 494
C 372 I 21
D Max. 50 J 549
E 596 K 579
F 595 L 559
2020-02-26 11:44:42