Philips HQ7762 Bedienungsanleitung Seite 18

EnglisH
20
Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it
may take several weeks before optimal shaving
performance is restored.
Remove the hairs with the brush supplied.
Put the shaving heads back into the shaving unit. Put
the retaining frame back into the shaving unit and
turn the lock clockwise.
To prevent long hairs from obstructing the shaving
heads, remove the shaving heads once a month and
clean them with the brush supplied.
- Cause 3: the shaving heads are damaged or worn.
Replace the shaving heads. See chapter
'Replacement'.
3 The shaver does not work when the on/off
button is pressed.
- Cause 1: the battery is empty.
Recharge the battery. See chapter 'Charging'.
- Cause 2: dried-up shaving gel/lotion is blocking the
shaving heads.
Clean the shaving heads thoroughly. See chapter
'Cleaning and maintenance'.
- Cause 3: the shaving heads are damaged.
Replace the shaving heads. See chapter
'Replacement'.
4 The cover of the cartridge compartment
cannot be closed
- Cause 1: the cartridge has not been inserted
correctly.
Insert the cartridge correctly. It only fits properly
into the shaver if the white side of the pump is
pointing upwards.
- Cause 2: the cartridge has not been pushed far
enough into the shaver.