Micromario DI DACH_EN
NanoCloud technology evenly distributes invisible water vapour into your room.
In dry conditions moisture from the humidi er will be absorbed by walls,
furniture, and other items in your room. Ventilation of dry outside air will also
increase the time it takes to reach the target humidity.
To optimize humidi cation and puri cation performance, it's recommended to
close doors and windows during use.
Connectivity
You can use the app to control the puri er and check air quality.
Download and install the Philips app
Clean Home+
Open the app and click on "Connect a New Device" or press the "+"
button to connect your device. Please follow the steps in the app.
Control
Power
Child
Auto
Fan
Humidity
lock
Mode
speed
Hold for 3 seconds: Display switch between
Hold for 3 seconds
PM2.5 / IAI / Current humidity level
Display
Replace
Water
Pre- lter
Sleep
mode
lter alert
re ll alert
cleaning
alert
PM2.5
WiFi
Indoor Allergen
indicator
indicator
Index
Allergen index from 1 to 12
where 1 indicates best air quality
2-in-1
Light
Timer/
mode
setting
dim
reset
on/o
Auto
Allergen
Puri cation
2-in-1
mode
mode
ONLY mode
mode
3-digit display PM2.5 /
Air quality
IAI / Humidity level
ring
Good
Fair
Poor Very poor
Maintenance
Wick
Pre- lter
EVERY
Rinse the water tank, the water tray and the
WEEK
NanoCloud rotray humidi cation wick.
When display shows F0
2 hours
Clean the pre- lter and wick
Descale the wick with the water and white
vinegar or citric acid, rinse with water and air dry.
When display shows A3 / C7 / F1
Time to replace
Time to replace wick
NanoProtect lter
!
Press
for 3 seconds to reset after
cleaning or replacing accessory
The lter may produce smell after being used
for a while because of the absorption of
indoor air. Remove the lter and place it
where it has direct sunlight and ventilation for
Time to replace
several hours. Re-install and try using it again.
Active Carbon lter
If the odor remains, please replace the lter.
90x127mm
NanoProtect lter Series 3
NanoProtect lter
Active Carbon
4241 210 99873-1