Emptying The Appliance - CASO DESIGN Café Crema Touch Original Bedienungsanleitung

Fill the water tank up to the Max mark. Enter descaling agent into the water tank. Insert the
water tank into the appliance. Plug in the mains plug. Place a large collecting vessel in
such a way that it is positioned under the spout as water escapes from it. (If necessary
remove the drip tray if the vessel would not otherwise fit under the spout.)
Press and hold the button and the button at the same time until you hear a
beep. and flash in the display. Confirm descaling with . The
symbol flashes in the display and indicates that the device is performing the descaling and
cleaning process.
WARNING
► Be careful as hot water may spurt out of the device / vessel, risk of burning or scalding.
When the first step of the descaling process has been performed, and will
flash in the display. The device beeps.
Do not leave the device unattended, as the device may switch off if you do not follow
these steps promptly: Remove all the remains of the descaling agent from the water tank
and thoroughly rinse it. Empty the collecting vessel and place it under the spout. Fill the
water tank once more up to the Max mark. Insert the water tank into the appliance.
Caution: the device immediately continues the descaling and cleaning process and
stops flashing. The device automatically switches itself off once the process has been
completed. Empty the collecting vessel and thoughly rinse the water tank once more.
The device can then be operated as usual.
Please note
► Never interrupt the descaling process.
► The guarantee excludes devices which have stopped working or do not work properly
due to lack of descaling.

16.8 Emptying the appliance

A device that is not used for a long time, stored or sent to our customer service for repair
must be completely emptied.
Press and the button together for approx. 5 seconds. The LED
flashes. Remove the water tank. The LED now flashes constantly. The device
is emptied and then switches itself off. Pull the mains plug. Store the device at a dry
location. If you want to put the device back into operation, then proceed as described
under "Before first use".
74