Silvercrest SHBR 560 A1 Bedienungsanleitung Seite 97

If necessary, clean the opening in which the waste water tank
the appliance with a damp cloth or rag (see fig. 26).
Fig. 26
Allow the dirt filter
9
tank to dry completely (see fig. 27).
Once the parts are fully dry, replace the dirt filter
water tank
Fig. 27
Place the lid of the waste water tank
(see fig. 29).
Fit the waste water tank
of the waste water tank
appliance until the waste water tank
■ 94 │ GB │ MT
0
, the waste water tank
9
(see fig. 28).
2
back onto the appliance by inserting the bottom
2
first. Then push the waste water tank
2
and the lid of the waste water
0
back in the lid of the waste
Fig. 28
9
back onto the waste water tank
2
audibly clicks into place (see fig. 30).
2
is located on
2
2
into the
SHBR 560 A1