Maintenance; Dismounting; Dismounting Steps; Disposal - SICK LFV 200 Betriebsanleitung

6 Maintenance

Level
Mode
min.
Mode
min.
Fault any
6 Maintenance
6.1 Maintenance
If the instrument is used properly, no special
maintenance is required in normal operation.
7

Dismounting

7.1

Dismounting steps

Warnung:
Before dismounting, be aware of dan-
gerous process conditions such as e.g.
pressure in the vessel, high temperatu-
res, corrosive or toxic products etc.
Take note of chapters "Mounting" and "Connec-
ting to power supply" and carry out the listed
steps in reverse order.
7.2

Disposal

The instrument consists of materials which can
be recycled by specialised recycling companies.
We use recyclable materials and have designed
the parts to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE
directive 2002/96/EG and the respective nati-
onal laws. Pass the instrument directly on to a
18
Downloaded from www.Manualslib.com
Swit- Con- Con-
ching trol trol
status lamp lamp
Yellow Green
- co- - vol-
verage tage
indica-
tion
closed
open
open any
manuals search engine
specialised recycling company and do not use
Con-
the municipal collecting points. These may be
trol
used only for privately used products according
lamp
to the WEEE directive.
Red -
fault Correct disposal avoids negative effects on
signal
humans and the environment and ensures
recycling of useful raw materials.
Materials: see chapter "Technical data"
If you have no way to dispose of the old instru-
ment properly, please contact us concerning
return and disposal.
LFV 200 • Tuning Fork