Kessel Aqualift Comfort Mono 400V Einbau- Und Betriebsanleitung Seite 42

Route the green-yellow earthing cable from the pump to
the control unit and feed into the control unit via a sepa-
rate cable gland (enclosed).
Set the motor protection switch to the nominal current of
the pump (see type plate of the pump).
4.3 Connect mains cable 400V
► Lay the mains cable through the left-hand cable passage
up to the connection terminals and the main switch.
► Establish the connections in accordance with the connec-
tion diagram (in the housing cover of the control unit).
► Tighten the cable gland by hand.
42 / 204
Connection overview for the mains cable
Source
Mains
Installation and operating manual
Connec- Type of Label
tion conduc-
Cables tor
Protective Yel-
earth low-green
Neutral Blue
5-wire
Phase L1
Phase L2
Phase L3
Connec-
tion
name
PE
N
T1
T2
T3
010-532_06