UltraMedia MSat-65 Bedienungsanleitung Seite 22

INSTALLATION ON THE ROOF
3. Assembly with screws:
a) Transfer the mounting points of the mounting plate to the vehicle
b) Secure the mounting plate securely on the roof.
c)
d) Fasten the mirror support so that the satellite dish lies horizontally
4. Additional assembly with adhevis.
a) Transfer the outline of the mounting plate to the vehicle roof when it
b) After loosening the screws, clean the marked area and the mounting
c)
d) Press the system evenly onto the mounting surface.
e) Then screw the antenna back on.
f)
g) Use commercially available body sealant to seal the mounting
h) Remove excess adhesive residue.
roof and drill the corresponding holes.
Use commercially available body sealant to seal the mounting
screws.
when retracted.
is screwed on.
plate.
Roughen the surface slightly and apply the assembly adhesive evenly.
Note the drying time of the adhesive used.
screws.