RuarkAudio R3 Bedienungsanleitung Seite 14

Setup wizard
MENU > System > Setup wizard
Runs the setup wizard to guide you through setting up
the clock and network.
Inactive standby
Your R3 is set to automatically switch itself to standby
if there is no audio for more than 20 minutes. To change
this select MENU > System > Inactive standby.
Network wizard
For a guided process to help you connect to a wired or
Wi-Fi network, select MENU > System > Network >
Network wizard.
Network profiles
Your R3 will automatically attempt to connect to any
network it has previously connected to.
To see the list of saved networks, select MENU >
System > Network > Network profile. To delete an
unwanted network, highlight it, press the CONTROL
KNOB and select YES.
Keep network connected
MENU > System > Network > Keep connected
Choose whether your R3 always remains connected to
your network, even in standby (default). We recommend
you set it to keep connected as it will ensure your R3
is always accessible using Spotify or DLNA music
streaming. We also recommend this if you have set your
clock to update from Network.
System information
Shows details of your R3 including the software version,
and unique radio ID code.
Advanced network settings
There are other advanced network settings for
experienced users for manual configuration or diagnosing
and fixing network problems.
For more information visit
www.ruarkaudio.com/support.
Currently saved settings are marked with an asterisk ( )
EN