• Operate the appliance only with closed lid. Before removing the lid, wait for the
blades to stop completely.
• Never use any boiling liquids. Allow those liquids to cool down first (lukewarm) to
avoid serious injuries/burns. Only fill the mixing jug half full.
• If the blade should experience any problems during operation, switch off the
appliance, disconnect it from the mains and remove the blockage.
• Only fill the mixing jug half full since the food will rise up the jug because of the
blender's circular movement. If you work with fluid ingredients, don´t fill the mix-
ing jug with more than 1 liter. Larger servings are to be processed in several
operations.
• Never operate the blender with an empty mixing jug.
• Remove any contents from the mixing jug with a spatula. Appliance must be
turned off. Never put your hands in the mixing jug while appliance is being oper-
ated.
• Do not place the appliance on hot surfaces or close to open flames.
Before first use
• Remove all packaging material and check whether the appliance is complete.
• clean the appliance as specified under "cleaning and care".
• Place the appliance on a table or another even, heat-resistant surface.
Operation
Installing the mixing jug on the plastic housing
• Make sure the appliance is switched off (0-position).
• Put the mixing attachment (10) on the housing so that the green arrow on the
housing is above the open lock on the engine block. Now turn the mixing attach-
ment clockwise until the green arrow on the housing is above the locked lock on
14
Danger of injury!
Danger of burns!