Herunterladen Inhalt Inhalt Diese Seite drucken

Bosch I8 VarioComfort Serie Gebrauchsanleitung Seite 25

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Problem
Dirt comes out
through the
soleplate.
The "Calc'nClean"
indicator light (3)
does not turn off.
The ironed garment
turns a dark colour
and/or sticks to the
soleplate.
The appliance
makes a pumping
sound.
Loss of pressure
during ironing.
Water spots appear
on the garment
during ironing.
The hose gets hot
during use.
Water leakage from
the boiler.
The "Water tank
empty" indicator
light (4) comes on.
If the above tips do not solve the problem, get in touch with our
customer service.
You can download this manual from the Bosch local
homepages.
* Model dependent
Possible causes
1. There is a build up of limescale
or minerals in the boiler and
iron.
2. Chemical products or additives
have been used.
1. The iron descaling process has
been stopped before being
completed.
1. The selected temperature is too
high and has damaged the
garment.
1. Water is being pumped into the
steam tank.
2. The sound does not stop.
1. The steam release button has
been activated for too long a
period of time, meaning it has
been pressed too frequently.
1. May be caused by steam
condensed on the ironing
board.
1. This is normal. It is caused by
the steam passing through the
hose during steam ironing.
1. Boiler cap (9) is loose.
1. The water tank is empty or not
correctly fitted onto the
appliance.
Solution
1. Carry out a cleaning cycle (see
the "Descaling process"
section).
2. Never add products to the water
(see the "Filling the water tank"
section).
Clean the soleplate with a damp
cloth.
1. Restart and complete the iron
descaling process.
1. Select a suitable temperature for
the material being ironed and
clean the soleplate with a damp
cloth.
1. This is normal.
2. If the sound does not stop, do
not use the steam station and
contact an authorised technical
service centre.
1. Use the steam release button at
intervals.
1. Wipe the textile cover of the
ironing board, and iron any
water drops to dry them.
1. Place the hose on the opposite
side so that you do not touch the
hose during ironing.
1. Tighten the cap.
1. Fill the water tank or fit it
correctly.
25
BOS CH

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis