Before First Use; How To Use; Touch-Panel And Functions - Caso B 3000 Touch Bedienungsanleitung

15.1 Before first use

Clean the device, see "cleaning".

15.2 How to use

15.2.1 Touch-panel and functions

Please note
► You can hear a signal tone when device has accepted the entry.
SPEED - / + adjust the speed
STOP – to stop the program
CLEAN – To choose the cleaning program. It runs on highest speed level.
START: Starts the chosen mixing process. The button is flashing. When the chosen time
has expired the button lights constantly. The device changes to default 30 seconds at
speed 3, this is shown on the display, all buttons are illuminated.
STOP: Stops the chosen program. The display turns to initial state and all buttons are
illuminated.
PAUSE: Suspends the chosen program, the PAUSE button flashes,
when you press PAUSE button again the program will be continued.
PULSE: As long as you press the PULSE button the device will work on highest speed
level. The button is flashing, all other buttons are illuminated. The pulse function is shown
in the display. You cannot use the pulse function with automatic mixing programs.
+ SPEED increases in manual mode the speed level 1-2-3- ...-9-H.
- SPEED reduces in manual mode the speed level H-9-...-3-2-1.
+ TIME / - TIME: setting the time from 0:00 to 8:00 respectively from 8:00 to 0:00 in
following steps:
1-60 seconds in 5 seconds steps
2-8 minutes in 20 seconds steps
the time faster. It can be set a maximum of 8 minutes. The respective time button flashes.
Caso B 3000 Touch
TIME - /+ - adjust the time
START– to start the program
1-2 minutes in 10 seconds steps
When you press button for 3 seconds you can set
41