Installation Instructions - Presto PRESTOTHERM 55L Installationsanleitung

ENGLISH

1) INSTALLATION INSTRUCTIONS

2) PRESTOTHERM centralised mixing valves maintenance kit
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain
the pipes that can damage the mechanisms or water passages (PRESTO® heads that can be dismantled from front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) Correspondence of kits:
Art.
Description
Nr.
84513 Cover kit (x1)
84514 Cover kit (x1)
84515 Cartridge kit (x1)
84516 Cartridge kit (x1)
Replacement kit
84517
(x1)
84518 Seals kit (x1)
84519 Cartridge kit (x1)
84520 Seals kit (x1)
84521 Cartridge kit (x1)
5) Installation:
· The kits must be installed by an authorised person.
· Close the hot and cold feeds by using the shut-off valves at the inlets.
· Remove the green ABS adjustment cover using a 2.5 Allen wrench.
· Lubricate all the seals of maintenance kits and cartridges with ACS silicone-base grease.
· Reinstall the cartridges or assembly elements in the reverse order to that of removal by taking care not to scratch the surfaces.
· The mixing valve must then be commissioned according to the installation instructions, including the temperature adjustment and the
temperature tests (Anti-burn safety).
6) This document is not contractual; we reserve the right to modify the characteristics of our products without notice.
7) PATENTED and REGISTERED MODELS
PRESTOTHERM PRESTOTHERM
55L 84L
X
X
X
X
PRESTOTHERM PRESTOTHERM
134L 188L
X X
X X
PRESTOTHERM PRESTOTHERM
280L 450L
X X
X
X
X
X