Ie: Interval Of The Extended Cleaning Time "Interval Extra Cleaning; E7: Pump Status Detection - Oase ProfiClear Premium TF-XL Gebrauchsanleitung

- EN -
6.5.4

IE: Interval of the extended cleaning time "Interval Extra Cleaning"

This menu is used to set the number of cleaning cycles after which an extended cleaning time
"Extra Cleaning" is performed.
The default setting is one extended cleaning time "Extra Cleaning" after 20 cleaning cycles.
Proceed as follows
1.
Press several times until IE appears
in the display.
2.
Press for 5 s until the cleaning time
is indicated in the display.
3.
Press several times to change the
value.
• To change the value quickly: Hold down
the button.
6.5.5

E7: Pump status detection

The pump status detection signals whether the pump is operating properly via the Er88 system
message. The status detection is activated in the default setting.
Proceed as follows
1.
Press several times until E7 appears
in the display.
2.
Keep pressed for 5 s until the value
0 or 1 is indicated in the display.
3.
Press to change the value.
70
Information
To cancel and exit the menu: Either wait for 10 s or press
.
To cancel and exit the menu: Either wait for 5 s or press
• Adjustable range: 20 ... 99 rinsing cycles
• Increment: 1
• The number can only be changed upwards. Once the value 99 is
reached, the display returns to 20.
• Saving the set value: Wait for 5 s until the menu is automatically
exited.
• Cancel without saving and exit the menu: Press
Information
• To cancel and exit the menu: Either wait for 10 s or press
.
• To cancel and exit the menu: Either wait for 5 s or press
.
Adjustable range: 0 or 1
• 0: The pump status detection is deactivated.
• 1: The pump status detection is activated.
• Cancel without saving and exit the menu: Press
or
or .
or .
or
or
or .